For high-voltage connectors, LANXESS creates new PBT compound
In the powertrain or battery of electric vehicles, as well as in the charging infrastructure of electromobility, plastic components are often exposed to high temperatures along with very strong currents and high voltages. Plastic connectors, for example, must remain electrically insulating under these conditions and must not allow tracking to occur. LANXESS announced that, for high-voltage connectors, it has tailored a new PBT (polybutylene terephthalate) compound that is halogen-free flame-retardant and hydrolysis-stabilized. “One strength of the structural material is that its outstanding electrical properties are hardly dependent on temperature and moisture in the typical operating conditions of high-voltage connectors. It can be used at temperatures of up to 150 °C,” explains Dr. Bernhard Helbich, Technical Marketing Manager Key Accounts at LANXESS’ High Performance Materials business unit.
Highest insulation class CTI A 600
The compound is a first representative of the new Pocan BFN HR product range and is characterized by a high level of volume resistance and dielectric strength. For example, the latter is well over 30 kilovolts per millimeter at temperatures of up to 140 °C (IEC 62431-1). In the CTI test (Comparative Tracking Index, IEC 60112), the material achieves CTI A 600, the highest class possible according to the standard. This makes it highly tracking-resistant, which reduces the risk of short circuits and defects caused by creepage currents and caters to the growing need for miniaturized connectors. “But it can also be used at voltages higher than 600 V. The connector design for direct current systems can be optimized for up to 1,500 V in accordance with the design guidelines of the standard IEC 60664 / VDE 0110-1,” says Helbich. The tracking resistance of the compound also hardly diminishes after long-term thermal aging at 120 °C or after climate testing.
Hydrolysis-resistant and flame-retardant
The material, which is reinforced with 25 percent by weight of glass fibers, is very stable to hydrolysis. In specimen tests based on the stringent SAE/USCAR-2 Rev. 6 long-term hydrolysis tests of the US Society of Automotive Engineers (SAE), it achieved Class 3 – a good rating. Its good flame-retardant properties are demonstrated by the fact that it passed the UL 94 flammability test of the US testing institute Underwriters Laboratories Inc. with the excellent classification V-0 with a test specimen thickness of 0.75 millimeters. With its mechanical properties, the structural material meets the common requirements that are set for high-voltage connectors.
Bright colors and permanently color-stable
The compound can also be colored in bright colors, such as orange. This color is increasingly being used in electric vehicles to identify live, plastic-encased components. “Our material and the colorants used remain permanently color-stable in high operating temperatures so that the identification is not lost,” explains Helbich. LANXESS wants to have the thermoplastic listed under “All Colors” on the Yellow Card by UL. “In doing so, we will save the processor from the time-consuming UL certification process if they were to color the plastic themselves,” explains Helbich. “They can simply use the compound that we have colored and thus reduce costs,” he adds.
Beyond high-voltage connectors, Helbich sees even more possible applications for the new Pocan BFN HR product range in electromobility and in the manufacturing of miniaturized electrical and electronic assemblies: “We are thinking, for example, of miniature connectors, miniature circuit breakers, terminal blocks, and other similar applications,” he says.
HiAnt – service that pays off for the customer LANXESS supports manufacturers of components for electromobility with comprehensive HiAnt services. These include, for example, customer-specific material optimization and joint concept development for component design. Experts from the specialty chemicals company use the latest computer-aided engineering (CAE) methods to calculate the mechanical and thermal properties of components. Tests on the finished part can be carried out in the company’s part testing center. LANXESS specialists are also on hand to provide advice and support during the start of series production.